DKLUIV - DIALOCK® 2-way diaphragm valve DN 15:65
DIALOCK® diaphragm valve with stroke limiter and female union ends for solvent welding, metric series.
The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body increases flow coefficient, reduce pressure drop and allows a sensitive and precise adjustment along the entire stroke of the shutter. The DK is extremely compact and very light. The innovative handwheel is equipped with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in any position.
Main features:
- High visibility graduated optical position indicator protected by a transparent cap with seal O-Ring
- Customisation plate: the customisation lets you identify the valve on the system according to specific needs
- DIALOCK® SYSTEM: innovative handwheel with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in over 300 positions
- Handwheel and bonnet in high mechanical strength and chemically resistant PP-GR, providing full protection by isolating all internal metal parts from contact with external agents
- Floating pin connection between the control screw and diaphragm to prevent concentrated loads, improve the seal and extend its lifetime
- New design of valve body interior: substantially increased flow coefficient and reduced pressure drop. The degree of efficiency reached has also enabled the size and weight of the valve to be reduced
- Adjustment linearity: the internal profiles of the valve also greatly improve its characteristic curve, resulting in extremely sensitive and precise adjustment along the entire stroke of the shutter
- Valve anchoring bracket integrated in the body, with threaded metal inserts allowing simple panel or wall mounting using the PMDK mounting plate (supplied as an accessory)
EPDM
| Reference | H | Z |
|---|---|---|
| DKLUIV020E | 129 | 100 |
| DKLUIV025E | 154 | 116 |
| DKLUIV032E | 168 | 124 |
| DKLUIV040E | 192 | 140 |
| DKLUIV050E | 222 | 160 |
| DKLUIV063E | 266 | 190 |
FKM
| Reference | H | Z |
|---|---|---|
| DKLUIV020F | 129 | 100 |
| DKLUIV025F | 154 | 116 |
| DKLUIV032F | 168 | 124 |
| DKLUIV040F | 192 | 140 |
| DKLUIV050F | 222 | 160 |
| DKLUIV063F | 266 | 190 |
PTFE
| Reference | H | Z |
|---|---|---|
| DKLUIV020P | 129 | 100 |
| DKLUIV025P | 154 | 116 |
| DKLUIV032P | 168 | 124 |
| DKLUIV040P | 192 | 140 |
| DKLUIV050P | 222 | 160 |
| DKLUIV063P | 266 | 190 |
- Connection system for solvent weld, threaded and flanged joints
- Optimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the body
- Internal components in metal, totally isolated from the fluid and external environment
- Modularity of the range: only 2 handwheel and 4 diaphragm and bonnet sizes for 7 different valve sizes
- Non-rising handwheel that stays at the same height during rotation, equipped with a graduated optical indicator protected by a transparent PVC cap with seal O-Ring
- Bonnet fastening screws in stainless steel protected against the external environment by PE plugs. Absence of metal parts exposed to the external environment to prevent any risk of corrosion.
- CDSA (Circular Diaphragm Sealing Angle) system that, thanks to the uniform distribution of shutter pressure on the diaphragm seal, offers the following advantages:
- reduction in the tightening torque of the screws fixing the actuator to the valve body
- reduced mechanical stress on all valve components (actuator, body and diaphragm)
- easy to clean valve interior
- low risk of the accumulation of deposits, contamination or damage to the diaphragm due to crystallisation
- operating torque reduction
Videos
DK DIALOCK DN 15-65 - manual and actuated version
Downloads
476.4 KB,
PDF