DKLDF - DIALOCK® 2-way diaphragm valve DN 15:65

DIALOCK^® diaphragm valve with stroke limiter and male ends for socket welding, metric series.

The DK DIALOCK^® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body increases flow coefficient, reduce pressure drop and allows a sensitive and precise adjustment along the entire stroke of the shutter. The DK is extremely compact and very light. The innovative handwheel is equipped with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in any position.

Main features:

High visibility graduated optical position indicator protected by a transparent cap with seal O-Ring
Customisation plate: the customisation lets you identify the valve on the system according to specific needs
DIALOCK^® SYSTEM: innovative handwheel with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in over 300 positions
Handwheel and bonnet in high mechanical strength and chemically resistant PP-GR, providing full protection by isolating all internal metal parts from contact with external agents
Floating pin connection between the control screw and diaphragm to prevent concentrated loads, improve the seal and extend its lifetime
New design of valve body interior: substantially increased flow coefficient and reduced pressure drop. The degree of efficiency reached has also enabled the size and weight of the valve to be reduced
Adjustment linearity: the internal profiles of the valve also greatly improve its characteristic curve, resulting in extremely sensitive and precise adjustment along the entire stroke of the shutter
Valve anchoring bracket integrated in the body, with threaded metal inserts allowing simple panel or wall mounting using the PMDK mounting plate (supplied as an accessory)

Go back

EPDM

Reference	H	d	DN	g
DKLDF020E	124	20	15	527
DKLDF025E	144	25	20	557
DKLDF032E	154	32	25	786
DKLDF040E	174	40	32	847
DKLDF050E	194	50	40	1760
DKLDF063E	224	63	50	2753
DKLDF075E	284	75	65	2931

FKM

Reference	H	d	DN	g
DKLDF020F	124	20	15	527
DKLDF025F	144	25	20	557
DKLDF032F	154	32	25	786
DKLDF040F	174	40	32	847
DKLDF050F	194	50	40	1760
DKLDF063F	224	63	50	2753
DKLDF075F	284	75	65	2931

PTFE

Reference	H	d	DN	g
DKLDF020P	124	20	15	527
DKLDF025P	144	25	20	557
DKLDF032P	154	32	25	786
DKLDF040P	174	40	32	847
DKLDF050P	194	50	40	1760
DKLDF063P	224	63	50	2753
DKLDF075P	284	75	65	2931

Connection system for solvent weld, threaded and flanged joints
Optimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the body
Internal components in metal, totally isolated from the fluid and external environment
Modularity of the range: only 2 handwheel and 4 diaphragm and bonnet sizes for 7 different valve sizes
Non-rising handwheel that stays at the same height during rotation, equipped with a graduated optical indicator protected by a transparent PVC cap with seal O-Ring
Bonnet fastening screws in stainless steel protected against the external environment by PE plugs. Absence of metal parts exposed to the external environment to prevent any risk of corrosion.
CDSA (Circular Diaphragm Sealing Angle) system that, thanks to the uniform distribution of shutter pressure on the diaphragm seal, offers the following advantages:
- reduction in the tightening torque of the screws fixing the actuator to the valve body
- reduced mechanical stress on all valve components (actuator, body and diaphragm)
- easy to clean valve interior
- low risk of the accumulation of deposits, contamination or damage to the diaphragm due to crystallisation
- operating torque reduction

DK DIALOCK DN 15-65 - manual and actuated version

478.5 KB, PDF

DK DN 15:65 PVDF Technical Catalogue

DKLDF - DIALOCK® 2-way diaphragm valve DN 15:65

Main features:

Videos

Downloads